The Difference Between EMP and CME

(You can also listen to the podcast on EMP and EMP Protection.)

Be sure to check out the videos I did that demonstrates shielding against a 50,000 watt AM signal, and the Surviving EMP Mini-Guide:

There is a lot of misinformation about Electromagnetic Pulse (EMP) and Coronal Mass Ejection (CME) events, about what they are and how they effect things.  One of the big misconceptions is that they are the same.  While they may have a similar component and both can cause power outages, there are some striking differences.

The main difference between an EMP attack and a CME impact is what is effected.  For EMP, both the power grid and electronics are damaged and destroyed.  In a CME impact, mainly the power grid is affected, while electronics are untouched.


There are actually three components, or pulses, to an EMP, they are called E1, E2 and E3:

  • E1– The first component is a very fast, high voltage pulse. It is very brief, but very intense.
    • It is much faster than lightning and common lightning and surge suppressors will not stop this pulse.
    • It induces high voltages in wiring and cables, like power lines, phone lines, etc.
    • This is the component that destroys computers and electronic equipment.
  • The E2 pulse is a lot like lightning and is easier to protect against, though if the protection circuit was destroyed or damaged by the E1 pulse, may still do more damage.
  • The E3 pulse is a long duration pulse and is no like the E1 and E2 pulses.
    • It’s a very slow pulse, which can last up for minutes.
    • It is caused by the nuclear detonation disrupting the Earth’s magnetic field. Which sounds a lot like what happens during a CME impact.
    • This is the wave that shuts down the power grid. It does this by inducing a DC-like current. When enough DC current flows through a transformer, it melts.

While a CME can damage electronics in space, such as those on satellites and on the Space Station, it doesn’t generate any E1 pulse.  A severe CME could take out large portions of the power grid out for years, but they would not damage any electronics equipment down here on Earth unless, perhaps, connected to the power grid or other very long lines.

This entry was posted in EMP, Natural Disasters, Technological Disasters and tagged , , , , . Bookmark the permalink.

8 Responses to The Difference Between EMP and CME

  1. Pingback: Episode 120 – EMP and EMP Protection Part 1 | The Preparedness Podcast

  2. Pingback: Episode 121 – EMP and EMP Protection Part 2 | The Preparedness Podcast

  3. Pingback: Why and how to protect your gear from EMP - Survival Mom

  4. Pingback: EMP vs. CME Part II: Different Impact Effects

  5. Pingback: The night can be so dark | It's a dangerous world.

Join in on the discussion!